Binds
and stabilises the joining sand
Trafficking, heavy rain, vacuum sweeping, arcraft jet blasts, weed growth
and burrowing insects can seriously erode paver jointing sand, causing block
instability and eventual failure. APC Paveseel® penetrates deeply into
the jointing sand to permanently bind the loose sand granules together creating
a pliable elastromeric and virtually impermeable structure between the blocks,
which will virtually eliminate further erosion.
Preserves
Flexibility
APC Paveseel®'s elastomeric nature preserves the essential flexibility
of the orignal joints and future easy removal of the blocks for access
to the substrate.
Protects
APC Paveseel® seal sand joints, inhibiting the ingress of water and
fuels. It discourages the growth of weeds, particularly between recently
laid block pavers.
Seals
the Pavers
Whilst APC Paveseel® is principally designed as a jointing sand binder
and stabiliser, it will also have a sealing effect on the block paver
surface.
Easy
to apply
APC Paveseel® is easily applied by foam squeezee direct from the container.
Quick
drying
Treated areas can be re-opened for traffic in 12 to 24 hours.
Uses
- ports
and terminals
- petrol
station forecourts
- aircraft
hard standings and taxiways
- foothpaths
and pedestrian precincts
- car
parks and ramps
- roads
and driveways
Packing
APC Paveseel® is available in 25 litre contaiers or 200 litre drums.
Appearance
APC Paveseel® is a clear, low viscosity liquid pre-polymer. Application
will result in slightly darkening of paver blocks, which will enrich the
original colour.
Coverage
Typical coverage is between 2 m2 to 2.5 m2 per litre depending on the
porosity of the pavers. We recommend that approximately 2 litres of APC
Paveseel® is decanted at a time before being worked into the paver
joints.
All information is based on results gained from experience and tests and
is believed to be accurate, but it is given without acceptable of liability
for loss or damage attributed to reliance thereon as conditions of use
outside our control.
|
